37JB10K/B3630 BLDC Planetary Gear Motor (Built in driver)
Features
1.Brushless motor built-in driver, with a positive inversion, speed control, brake (brake) function.
2.Ring gear can be selected within the two materials: Metal (Type:42JXE100K), Powder metal (Type:42JXF100K).
3.37mm OD Standard Gearbox,
Permissible Load Range: 1.0N.m
Brushless Motor Technical Data
| TYPE | Number
of poles | Number
of phase | Operating
Range | Rated
voltage
VDC | No- load
speed
r/min | No- load
current
mA | Rated
torque
g.cm | Rated
speed
r/min | Rated
current
mA | Rated
power
W |
| B3630-1247 | 8 | 3 | 9V~ 16V | 12 | 4680 | 270 | 90 | 3500 | 820 | 3.2 |
| B3630-2447 | 8 | 3 | 9V~26V | 24 | 4680 | 140 | 90 | 3500 | 410 | 3.2 |
Brushless Gear Motor Technical Data
1.B3630-1247 BLDC Motor
| Reduction ratio | 6 | 10 | 18 | 30 | 50 | 75 | 100 | 150 | 200 | 250 | 300 |
| Number of gear trains | 2 | 2 | 3 | 3 | 4 | 4 | 4 | 5 | 5 | 5 | 5 |
| Length(L) | mm | 21.5 | 21.5 | 26.5 | 26.5 | 29.0 | 29.0 | 29.0 | 31.5 | 31.5 | 31.5 | 31.5 |
| No-load speed | r/min | 780 | 468 | 260 | 156 | 94 | 62 | 47 | 31 | 23 | 19 | 16 |
| Rated speed | r/min | 583 | 350 | 194 | 117 | 70 | 47 | 35 | 23 | 18 | 14 | 12 |
| Rated torque | N.m | 0.043 | 0.071 | 0.12 | 0.19 | 0.29 | 0.43 | 0.57 | 0.78 | 1 | 1 | 1 |
| Max. permissible load in a short time | N.m | 0.5 | 0.5 | 1 | 1 | 2 | 2 | 2 | 3 | 3 | 3 | 3 |
2.B3630-2447 BLDC Motor
| Reduction ratio | 6 | 10 | 18 | 30 | 50 | 75 | 100 | 150 | 200 | 250 | 300 |
| Number of gear trains | 2 | 2 | 3 | 3 | 4 | 4 | 4 | 5 | 5 | 5 | 5 |
| Length(L) | mm | 21.5 | 21.5 | 26.5 | 26.5 | 29.0 | 29.0 | 29.0 | 31.5 | 31.5 | 31.5 | 31.5 |
| No-load speed | r/min | 780 | 468 | 260 | 156 | 94 | 62 | 47 | 31 | 23 | 19 | 16 |
| Rated speed | r/min | 583 | 350 | 194 | 117 | 70 | 47 | 35 | 23 | 18 | 14 | 12 |
| Rated torque | N.m | 0.043 | 0.071 | 0.12 | 0.19 | 0.29 | 0.43 | 0.57 | 0.78 | 1 | 1 | 1 |
| Max. permissible load in a short time | N.m | 0.5 | 0.5 | 1 | 1 | 2 | 2 | 2 | 3 | 3 | 3 | 3 |
Wire Diagram
PIN 1# (Blue) Brake control
PIN 2# (Orange) PWM speed regulation: Input a 20~30kHz PWM signal, and adjust the motor speed by adjusting the duty cycle.
PIN 3# (Black) Negative pole of power supply
PIN 4# (White) Forward and Reverse Rotation: Suspended steering is CCW, short circuited to ground steering is CW.
PIN 5# (Green) Feedback n=60 * F/P, where F is the feedback frequency and P is 4 pairs of motor pole pairs.
PIN 6# (Red) Positive pole of power supply
Connection line length 200mm
PIN 3 # PWM speed regulation, input 20~30kHz PWM signal, and adjust the motor speed by adjusting the duty cycle.
PIN 4# Forward and reverse rotation, suspended turning is CW, and short circuiting to ground turning is CCW.
PIN 5# Negative pole of power supply
Product Tags:
|
|
37mm OD Standard Gearbox BLDC Planetary Gear Motor 8 Poles Images
|
