3P DC 220V Surge Arrester , Class II DC Surge Protection Device For Solar Pv System
Surge protective device, protect against lightning surge voltages in solar system (photovoltaic power supply system).These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.
Performance characteristics:
Adopt the latest thermal separation technology, built-in thermal protection, automatic separation device for short-circuit failure, completely avoid fire;
The core components adopt internationally well-known brands, with excellent performance, stable and reliable work;
Lightning current arrestors OBV10-I-50 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions.The voltage-limiting,high-performance spark gaps provide several benefits.A short response time, a low protection level and high current leakage capability with long service life.
The main parameters:
Nominal working voltage Un: 12VDC
Maximum working current: 2A
Nominal discharge current In(8/20μs): 5kA
Maximum discharge current Imax (8/20μs): 10kA
Combination method: 1P
Response time: 25ns
Working environment: -40℃～＋85℃
Installation method: rail installation
Place of Origin: Dongguan
Qualification certification: CE, FCC, ROHS, product test report, Pacific Product Insurance, etc.
Test standard: IEC 61643-1:2005; GB 18802.1-2011 Low Voltage Surge Protector (SPD) Part 1 Surge Protector for Low Voltage Distribution System-Performance Requirements and Test Methods
Scope of application:
This product is a special lightning surge protector for DC systems, suitable for 12V DC power supply systems.
| Model | OBV10-I-50 |
| IEC Classification | Class II |
| DC Network Un (50/60Hz)(V) | 220V DC |
| Max. continuous operationg voltage Uc (V) | 350 DC |
| Nornimal discharge current In (kA) | 20kA |
| Max. discharge current(8/20us) Imax (kA) | 40kA |
| Voltage protection level Up (kV) | ≤1.4kV |
| Max. backup fuse (A) | 35A DC (gG) |
| Response time tA | ≤25ns |
| Capacity of withstand short circuit | 300A |
| Operating temperature | -40°C∼+85°C |
| Relative humidity | ≤95%(25°C) |
| Max. cross-sectional area of wire | 25mm2 multi-strand cord |
| Dimensions (1P) (W*L*H) (mm) | 18X90X62 |
| Mounting | DIN Rail 35mm |
| Protection rating | IP 20 |
| Housing material | PBT |
| Flame retardant rating | UL 94 V-0 |
| Capacity of remote signaling contact | 250VAC/0.5A 30VDC/3A |
| Max.cross-sectional area of wire for remote signaling contact | 1.5mm² multi-strand cord/single cord |
| Status indicator | Normal: Green Malfunction: Red |
| Standards compliance | EN50539-11 IEC61643-31 GB/T 18802.31 |
Product Tags:
|
|
220V Solar Dc Spd , Lightning Arrester For Solar System Class 2 3P Images
|
